Trooper LTD 4WD V6-3.5L (2002)
1. Install timing belt.
1. Align groove of crankshaft timing pulley (2) with mark on oil pump (1).
Align the mark on the crankshaft timing pulley (3) with alignment mark (white dots line) on the timing belt (4).
Secure the belt with a double clip or equivalent clip.
Note: When timing marks are aligned, No. 2 piston will be on top Dead Center.
2. Align the marks on the camshaft drive gear pulleys with the corresponding alignment marks on the cylinder head covers.
3. Align the alignment mark (white line) on the timing (1) with alignment mark on the RH bank camshaft drive gear pulley (2) (on the left side as
viewed from the front of the vehicle) and put the timing belt on the camshaft drive gear pulley.
Secure the belt with a double clip or equivalent clip.