Trooper LTD 4WD V6-3.5L (2002)
Windshield: Service and Repair
Windshield
Parts Location
Removal
1. Disconnect the battery ground cable.
2. Remove windshield wiper.
3. Remove front cowl cover.
4. Remove windshield side moulding.
-
Pull the moulding out from the windshield side moulding clip.
5. Remove windshield support.
6. Remove windshield side seal.
7. Remove windshield (2).
-
Use a knife to cut through part of the adhesive caulking material.
-
Secure one end of a piece of steel piano wire (1) (0.02 inches in diameter) to a piece of wood that can serve as a handle.