Trooper S 2WD V6-3.5L (2001)
9. Prying the guide rail a little with a screwdriver, draw the outer tube out of the grommet (3). At this time, the inner cable (4) remains on the frame
assembly.
10. Remove the sun roof frame assembly.
REASSEMBLY
To reassembly, follow the disassembly steps in the reverse order, noting the following points.
1. When installing the motor or drive unit, set the sun roof set plate in the full closed position by pushing the link (3) portion using the screwdriver
(2).
2. When installing the sun roof glass (1) to the sun roof set plate, insert the original shims in the same position before removing the sun roof glass.