Trooper S 2WD V6-3.5L (2001)
Removal
1. Disable the SRS.
2. Loosen the air bag assembly fixing bolts from behind the steering wheel assembly using a TORX driver or equivalent until the air bag assembly
can be released from steering wheel.
3. Disconnect the yellow 2-pin connector located behind the air bag assembly and remove air bag assembly. Refer to SRS Connectors for removal
and installation.
4. Disconnect horn lead.
5. Remove steering wheel attachment nut.
6. Apply a setting mark across the steering wheel and shaft so parts can be reassembled in their original position.