VehiCROSS 4WD V6-3.5L (1999)
Fuel Gauge Unit: Service and Repair
Engine Driveability and Emissions
REMOVAL
1. Disconnect the negative battery cable.
2. Loosen the fuel filler cap.
3. Drain the fuel from the tank.
Tighten
-
Tighten the drain plug to 20 Nm (14 lb.ft.).
4. Disconnect the wiring connector from the fuel gauge unit.
5. Remove the fuel gauge unit retaining screws.
6. Remove the fuel gauge unit.
-
Cover or plug the fuel tank to prevent dust, dirt, or debris from entering the tank.
INSTALLATION
1. Install the fuel gauge unit.