VehiCROSS 4WD V6-3.5L (1999)
Hazard Warning Switch: Service and Repair
Removal
1. Disconnect the battery ground cable.
2. Remove the instrument panel cluster assembly. See: Instrument Panel, Gauges and Warning Indicators/Meter Assembly/Service and Repair
3. Remove the hazard warning switch (1).
-
Disconnect the connector (2).
-
Push the lock from the back side of the instrument panel cluster assembly.
Installation
To install, follow the removal steps in the reverse order, noting the following point:
1. Push in the switch with your fingers until it locks securely.