VehiCROSS 4WD V6-3.5L (1999)
Stoplight Switch: Service and Repair
Removal
1. Disconnect the battery ground cable.
2. Remove the stoplight switch (10).
-
Disconnect the connector (12).
-
Loosen the lock nut (11) and turn the stoplight switch.
Installation
To install, follow the removal steps in the reverse order, noting the following points.
1. Check to see if the brake pedal has been returned by the return spring to the specified position.
2. Turn the switch (1) clockwise until the tip of the threaded portion of the stoplight switch contacts the pedal arm.
3. Turn the stoplight switch counterclockwise until the space (A) between the tip of the threaded portion and the pedal arm (2) is 0.75 mm (0.03 in).
