isuzu Workshop Repair Guides

Isuzu Workshop Service and Repair Manuals

ABOUT US
Starter Cut Relay <--> [Ignition Shut Down Relay (For Antitheft)] > < Alarm Module, (Vehicle Antitheft)|Locations

VehiCROSS 4WD V6-3.5L (1999)

Page 1
background image

General Module: Service and Repair

Removal

1. Disconnect the battery ground cable.
2. Remove the glove box.
3. Remove the instrument panel driver lower cover assembly.
4. Remove the driver knee bolster reinforcement assembly.

5. Remove the fixing two bolts, disconnect the connectors and then remove the alarm & relay control unit (1).

Installation

To install, follow the removal steps in the reverse order.

Starter Cut Relay <--> [Ignition Shut Down Relay (For Antitheft)] > < Alarm Module, (Vehicle Antitheft)|Locations