isuzu Workshop Repair Guides

Isuzu Workshop Service and Repair Manuals

Driver Air Bag Assembly|Page 4057 > < Driver Air Bag Assembly|Page 4055
Page 10
background image

3. Place three tires without wheel on the tire on which air bag is fixed and a tire with a wheel on top.

Bind the five tires with a rope so that the tires may not collapse.

8. How to fix Passenger air bag.

1. Fix the air bag with its trim cover side fixing the center of a tire without a wheel using an automobile use wire harness (core size: 0.05 inch) or

a wire trebly at two or more points.

2. Connect Supplemental Restraint System (SRS) air bag assembly to the deployment harness double pole extension cord end. Be sure not to

connect the deployment harness to a power source. (If connected the SRS air bag assembly deploys immediately).

NOTE:  Ensure that the pigtail adapter is firmly seated into the air bag assembly connector. Failure to fully seat the connectors may leave the
shorting bar located in the air bag assembly connector functioning (shorting the deployment circuit) and may result in non deployment of the
air bag assembly.

Driver Air Bag Assembly|Page 4057 > < Driver Air Bag Assembly|Page 4055