VehiCROSS 4WD V6-3.5L (1999)
Air Bag Warning Lamp: Testing and Inspection
Warning Lamp Does Not Come "ON" Steady
Circuit Description:
When the ignition switch is first turned "ON", "ignition 1". Voltage is applied from the "SRS-1" fuse to the "AIR Bag" warning lamp which is connected
to "Supplemental Restraint System (SRS) warning lamp", terminal "7". The "SRS-2" fuse apply system voltage to the "ignition 1" inputs, terminals "12".
The Sensing and Diagnostic Module (SDM) responds by flashing the "AIR BAG" warning lamp seven times. If "ignition 1" voltage is more than 16
volts the "AIR BAG" warning lamp will be still "OFF" solid with no DTCs set.