VehiCROSS 4WD V6-3.5L (1999)
3. Remove the shoulder anchor cover(2) from the shoulder anchor(1).
4. Remove the upper anchor bolt.
5. Remove the lower anchor bolt.
6. Remove the rear roof trim cover.
7. Remove the luggage rear trim cover.
8. Remove the luggage side trim cover.
9. Remove the retractor.
Remove the fixing bolt.
10. Remove the rear seat belt assembly.
Installation
To install, follow the removal steps in the reverse order, noting the following points.
1. Fix the lower anchor(1) to the rotation-stop position(2) securely to install the rear seat belt assembly.
2. Tighten the seat belt anchor bolts to the specified torque.
Torque: 39 Nm (29 lb.ft)
3. Tighten the retractor fixing bolts to the specified torque.
Torque: 39 Nm (29 lb.ft)
