VehiCROSS 4WD V6-3.5L (1999)
2. Install the oxygen sensor on the exhaust pipe in its original position.
Tighten
-
Tighten the oxygen sensor to 55 Nm (40 lb.in.).
3. Connect the pigtail to the wiring harness.
4. Connect the negative battery cable.
2. Install the oxygen sensor on the exhaust pipe in its original position.
Tighten
-
Tighten the oxygen sensor to 55 Nm (40 lb.in.).
3. Connect the pigtail to the wiring harness.
4. Connect the negative battery cable.