VehiCROSS 4WD V6-3.5L (1999)
Front Steering Knuckle: Service and Repair
REMOVAL
1. Raise the vehicle and support the frame with suitable safety stands.
2. Remove wheel and tire assembly.
3. Remove the brake caliper.
4. Remove the hub assembly.
5. Remove outer track rod from the knuckle.
6. Remove the speed sensor from the knuckle.
7. Loosen torsion bar by height control arm adjust bolt, then remove torsion bar.
8. Remove wheel speed sensor.
9. Remove back plate.
10. Remove lower ball joint by using remover J-29107.
CAUTION: Be careful not to damage the ball joint boot.
11. Remove upper ball joint by using remover J-36831.
CAUTION: Be careful not to damage the ball joint boot.
12. Remove knuckle assembly.
13. Remove oil seal.
14. Remove washer.