VehiCROSS 4WD V6-3.5L (1999)
Lateral Stabilizer Rod: Service and Repair
REMOVAL
1. Remove nut and washer.
2. Remove bolt and nut.
3. Remove lateral rod.
INSPECTION AND REPAIR
Make necessary correction or parts replacement if wear, damage, corrosion or any other abnormal condition are found through inspection.
1. Lateral rod
2. Rubber bushing (Frame side)
-
Remove the rubber bushing (Frame side) by using remover J-39214.
-
Install the rubber bushing (Frame side) by using Installer J-39215.
NOTICE: When mounting rubber bushings, do not use grease on bushings or any other nearby parts.
3. Rubber bushing (Axle side)