VehiCROSS 4WD V6-3.5L (1999)
3. After installing the propeller shaft, be sure to apply black paint (1) to exposed area (other than connecting surface) of the entire surface of flange
coupling (Transfer side only).
Inspection and Repair
Make necessary correction or parts replacement if wear, damage, corrosion or any other abnormal condition is found through inspection.
Check the following parts for wear, damage, noise or any other abnormal conditions:
^
Constant velocity joint
Constant Velocity Joint
Notice: LJ and BJ constant velocity joints are unremovable types. Check the joint for play and the boot for damage, wear, and leak of grease. If
abnormality is found, replace propeller shaft as an assembly.
Play in Constant Velocity Joint
Fix the shaft in a vise between pieces of wood, and try to move the joint vertically, right and left, and back and forth to make sure of smooth motions
and no remarkable play.
