VehiCROSS 4WD V6-3.5L (1999)
3. If vibration is felt during the TOD drive, disconnect the propeller shaft at the front axle. Reinstall the propeller shaft at 60°, 120°, 180°, 240°, and
300° and conduct test drive in each position and check if there is vibration.
Rear Propeller Shaft
Rear Propeller Shaft
Rear Propeller Shaft and Associated Parts
Removal
1. Jack up the vehicle and support it on the chassis stands.
2. Gear shift lever should be placed in neutral position and parking brake released.
Notice: Apply alignment marks on the flange at the rear propeller shaft both front and rear side.
3. Remove bolt, nut and washer (Rear axle side).
4. Remove bolt, nut and washer (Transfer side).
5. Remove rear propeller shaft.
