S-Type (X200) V6-3.0L (2000)
Air Door Actuator / Motor: Service and Repair
Actuator - Center Console
Actuator - Center Console
Removal
1. Disconnect the battery ground cable.
2. Remove the instrument panel. See: Instrument Panel, Gauges and Warning Indicators/Instrument Cluster / Carrier/Service and Repair
3. Remove the panel, center console door actuator.
Disconnect the link end from the center console door.
Remove the actuator screws.
Remove the panel, center console door actuator.
Installation
1. NOTE:
New door actuator assemblies have the actuator in mid-position. If reinstalling an actuator removed from the vehicle, electrically drive the
actuator to the mid-position to assist in assembly.
To install, reverse the removal procedure.
If reinstalling an actuator removed from the vehicle, align the arrow (1) on the actuator housing with the line on the actuator coupling (2).