S-Type (X200) V8-4.0L (AJ28) (2001)
Disconnect vehicle battery (See Workshop Manual, JTIS CD ROM section 414-01, SRO 86.15.01).
WARNING:
After the battery has been disconnected, wait for one minute for the air bag system to disarm.
4.
Open hood and place protection covers over fenders.
5.
Remove plastic securing clips from driver's side of plenum finisher (Illustration 1).
6.
Reposition front edge of driver's side of plenum finisher upwards as required and disconnect coolant low-level sensor connector (Illustration 2).