S-Type (X200) V8-4.0L (AJ28) (2001)
/v8-4.0l_(aj28)/Page-939001.png)
Seals and Gaskets: Service and Repair
Seal-Selector Shaft
Seal-Selector Shaft
Removal
1. Raise and support the vehicle.
2. Detach the selector rod.
^
Remove the selector rod locating pin.
3. Detach the stabilizer rod.
^
Remove the stabilizer rod locating pin.
4. Remove the intermediate muffler. For additional information, refer to Exhaust System.
