S-Type (X200) V8-4.0L (AJ28) (2001)
![background image](/jaguar/s-type_(x200)/v8-4.0l_(aj28)/Page-939002.png)
5. Remove the center heat shield.
6. CAUTION: Under no circumstances must the flexible coupling (or its fixings) be loosened or removed from the driveshaft
Detach the transmission flexible joint.
^
Mark the position of the driveshaft in relation to the transmission flange.
^
Mark the position of each nut and bolt in relation to the transmission flexible joint.
7. NOTE: Support the front section of the driveshaft.
Shorten the length of the driveshaft.
^
Loosen the driveshaft locknut and move the driveshaft front section towards the center bearing.