S-Type (X200) V8-4.2L (2005)
Front Door Window Motor: Procedures
Front Door Window Regulator and Motor
Front Door Window Regulator and Motor
Removal
1. Remove the front door window glass.
2. Detach the front door window regulator and motor.
3. Detach the front door window regulator and motor.
4. Remove the front door window regulator and motor.
-
Disconnect the front door window regulator and motor electrical connector.
Installation
NOTE: Make sure the cable from the motor is the outermost cable.
1. To install, reverse the removal procedure.
2. Tighten to 6 Nm.