S-Type (X200) V8-4.2L (2005)
Front Door Window Motor: Testing and Inspection
Door Window Motor Initialization
1. NOTE: After the battery has been disconnected it is necessary to initialize each door window motor separately to operate the 'one-touch' up
function.
Operate the window control switch until the door window glass is in the fully closed position, continue to operate the window control switch for a
further two seconds.
2. Release the window control switch.
3. Operate the window control switch in the closed position and continue to operate the window control switch for a further two seconds.
4. Operate the window control switch until the door window glass is in the fully open position ('one-touch' down).
5. NOTE:
-
If the door window motor initialization has been completed correctly, when the window control switch is operated, the door window glass
should move to the fully closed position ('one-touch' up) automatically.
-
If the door window glass does not fully close automatically ('one-touch' up), repeat the complete procedure.
Operate the window control switch once to the close position.
6. Repeat the door window motor initialization for each door window motor.