S-Type (X200) V8-4.2L (2005)
3. CAUTION: Make sure that the front seat track motor drive bar is correctly aligned.
Attach the front seat track motor.
4. Install the retaining screws.
-
Tighten to 5 Nm.
5. Attach the front seat cushion cover retaining hooks.
6. Install the front seat.
Front Seat Recliner Motor
Front Seat Recliner Motor (86.75.04)
Removal
All vehicles
1. WARNING:
-
A restraints control module (RCM) only requires replacement if the system has incurred five separate deployments. At no time
change the RCM for less than five separate deployments.
-
Always wear safety glasses when repairing an air bag supplemental restraint system (SRS) vehicle and when handling an air bag
module. Failure to follow this instruction may result in personal injury.