S-Type (X200) V8-4.2L (2005)
13. Remove the lumbar support assembly.
-
Remove and discard the front seat lumbar motor retaining clips.
Vehicles Built From: 02/2004 (86.75.12)
Installation
1. To install, reverse the removal procedure.
-
Tighten to 7 Nm.
NOTE: Install new front seat backrest cover retaining clips.
Vehicles Built Up To: 01/2004 (86.75.12)
Installation
1. To install, reverse the removal procedure.
-
Tighten to 7 Nm.
NOTE: Install new front seat backrest cover retaining clips.
Lumbar Motor - Vehicles Built From: 02/2004
Lumbar Motor - Vehicles Built From: 02/2004
Removal