S-Type (X200) V8-4.2L (2005)
/v8-4.2l/Page-1703004.png)
^
Refer to GTR section 501-10 and remove the affected front seat.
^
Transfer the seat onto a suitable work surface.
^
Unhook bungee cord from tray. (Figure 4)
^
Undo and remove the motor gearbox plastic cover securing screws, and remove the plastic cover. (Figure 5)
^
Undo and remove the motor securing screws and displace the motor from drive bar. (Figure 6)
^
Visually check the gearbox for content of grease and inspect for damage to the worm spindle and bushings.
2.
If there is no grease and there is no damage to the worm spindle and bushings, perform the following:
