S-Type (X200) V8-4.2L (2005)
2. Detach the oil cooler.
^
Remove and discard the O-ring seal.
3. Lower the vehicle
All vehicles
1. CAUTION: Under no circumstances should special tool 303-645 be used in the following operations to lock the crankshaft. Failure to follow this
instruction may result in damage to the vehicle.
NOTE: The crankshaft pulley retaining bolt will be very tight.
Using special tools, retain the crankshaft pulley.
^
Remove and discard the crankshaft pulley retaining bolt.
2. Remove the special tools.
3. NOTE: The crankshaft pulley will be very tight.
Using special tools, remove the crankshaft pulley.
^
Collect the locking ring.
^
Remove and discard the O-ring seal.
4. Remove the special tools.
5. Remove the crankshaft front seal.