S-Type (X200) V8-4.2L (2005)
9. Install the power steering pump mounting bracket.
^
Tighten to 25 Nm.
All vehicles
1. Install the accessory drive belt idler pulley.
^
Tighten to 25 Nm.
2. Install the water pump pulley.
^
Tighten to 10 Nm + 45°.
3. Install the air conditioning compressor.
4. Install power steering pump.
Vehicles with supercharger
1. Install the supercharger drive belt.
Vehicles without supercharger
1. Install the oil cooler.
All vehicles
1. Install the left-hand valve cover.
2. Install the right-hand valve cover.
3. Remove the cooling fan motor and shroud.