S-Type (X200) V8-4.2L (2005)
1. CAUTION: When all retaining nuts have been torqued, re-torque all retaining nuts to 25 Nm.
CAUTION: Ensure exhaust manifold and heat shield/gasket is correctly aligned to cylinder head and studs.
Install the exhaust manifold.
^
Install new retaining nuts and a new heat shield/gasket.
^
Tighten to 25 Nm.
2. Install the right-hand exhaust manifold heat shield/gasket retaining bolt.
^
Tighten to 50 Nm.
3. Attach the exhaust gas recirculation (EGR) valve.
^
Install new retaining nuts and a new gasket.
^
Tighten to 22 Nm.
4. Install the right-hand exhaust manifold heat shield
^
Tighten to 3 Nm.
5. Install the exhaust system.