S-Type (X200) V8-4.2L (2005)
Muffler: Service and Repair
Front Muffler (30.10.18)
Front Muffler (30.10.18)
Removal
1. Remove both muffler and tailpipes.
2. Remove the support bracket.
3. Support the exhaust system using suitable stands.
NOTE: Left-hand shown, right-hand similar.
4. Loosen both catalytic converter retaining clamps.
NOTE: Detach both front muffler hanger insulators.
5. Remove the front muffler.
Installation
CAUTION: The hanger insulators are constructed of a special material. Use only the correct specification insulators.
NOTE: Check the hanger insulators for damage or fatigue. Install new hangers if required.
1. To install, reverse the removal procedure.
-
Tighten to 55 Nm.