S-Type (X200) V8-4.2L (2005)
Air Door Actuator / Motor: Service and Repair
Instrument Panel Blend Door Actuator
Instrument Panel Blend Door Actuator (82.20.83)
Removal
All vehicles
1. Disconnect the battery ground cable.
Left-hand drive vehicles only
1. Remove the glove compartment.
2. Disconnect the instrument panel blend door actuator remote linkage.
-
Disconnect the electrical connector.
-
Disconnect the instrument panel blend door actuator remote linkage.
3. Remove the instrument panel blend door actuator.
-
Remove the retaining bolts.
-
Remove the instrument panel blend door actuator.
Installation
1. To install, reverse the removal procedure.
NOTE: During installation make sure the actuator is fully meshed with the driven flap before tightening the bolts.