S-Type (X200) V8-4.2L (2005)
/v8-4.2l/Page-721002.png)
The rear electronic control module (REM) is connected to the SCP network. The REM controls the exterior rear lamps, the heated rear window, inertia
switch operation, trailer functionality, fuel pump driver circuit and luggage compartment lid.
The steering column lock actuator (SCLA) is connected to the SCP communication network. The module controls locking of the steering column and is
only equipped on vehicles with manual transmissions. It is controlled by the instrument cluster.
The adaptive damping module is connected to the SCP communication network. The module calculates the movement of the vehicle and adjusts the
suspension accordingly.
The electronic park brake (EPB) module is connected to the SCP communication network. The electronic park brake module controls the electrical
functions of the park brake system.
The high intensity discharge (HID) headlamp module is connected to the ISO 9141 communication network and also the CAN communication network.
The high intensity discharge headlamp module regulates the lamp output.
The transmission selector lever (JGM) is connected to the CAN communication network. The transmission selector lever communicates with the
transmission control module (TCM) and also perform its own internal fault monitoring.
The transmission control module (TCM) is connected to the CAN communication network. The TCM controls the automatic gearbox control solenoids
as well as communicating with other powertrain components on the CAN communication network. The TCM also provides for legislated diagnostics.
The reverse parking aid module is connected to the ISO 9141 communication network. The reverse parking aid module controls the electrical
components of the parking aid system.
