S-Type (X200) V8-4.2L (2005)
/v8-4.2l/Page-1447003.png)
NOTE:
-
Repair is made by replacement only. If a part is replaced and the new part does not correct the condition, install the original part and carry out the
diagnostic procedure again.
-
Make sure to tighten the retaining bolts to the correct specification.
1. To install, reverse the removal procedure.
-
Tighten to 12 Nm.
2. Tighten to 9 Nm.
3. Tighten to 9 Nm.
