S-Type (X200) V8-4.2L (2005)
5. Using the special tool, install the A/C clutch pulley.
-
Position the clutch pulley.
-
Install the special tool. If required, gently tap and install the A/C clutch pulley.
NOTE: The A/C clutch bearing and pulley is a slip fit on the compressor. If correctly aligned it should slip on easily. If difficulty is experienced,
install using the special tool.
6. Install the A/C clutch pulley circlip.
7. Install the shim.
8. Install the A/C clutch.
-
Install the A/C clutch retaining nut.
9. Using the special tool, tighten the A/C clutch retaining nut.