S-Type (X200) V8-4.2L (2005)
1. Disconnect the power steering control valve actuator electrical connector.
All vehicles
1. Detach the lower steering column.
Remove the steering gear shaft pinch bolt.
2. CAUTION: Cap the power steering lines to prevent loss of fluid and dirt ingress.
CAUTION: If power steering fluid comes into contact with the paint work, the affected area must be immediately washed down with cold water.
NOTE:
Drain the fluid into a suitable container.
Disconnect the power steering supply and return lines.
Remove and discard the O-ring seals.
3. Detach the steering gear supply and return lines.
Vehicles built up to 01/2004