S-Type (X200) V8-4.2L (2005)
/v8-4.2l/Page-1007001.png)
Shift Cable: Service and Repair
Selector Lever Cable Adjustment
Selector Lever Cable Adjustment
1. Remove the floor console.
2. Move the transmission selector lever to the 'R' position.
3. Loosen the selector lever cable retaining nuts.
4. Detach the selector lever cable.
5. NOTE: Fully extend the selector cable, then retract the selector cable one detent.
Make sure the selector lever cable is in the 'R' position.
6. Make sure the transmission selector lever is in the 'R' position.
