S-Type (X200) V8-4.2L (2005)
4.
Install and tighten the selector cable bracket retaining bolts to 8 Nm (Illustration 2).
Note:
Ensure the selector lever position corresponds to the illuminated gear indication light on the J-Gate. Any faults other than the selector cable
bracket retaining bolts - Service fix, are to be carried out as a separate Warranty Claim.
5.
Lower vehicle.
Global Technical Reference (GTR) Workshop Manual Information:
Internet access: http://www.jaguartechinfo.com
Parts Information
Warranty Information:
Warranty claims should be submitted quoting the information found in the table.
This will result in payment of the stated time and, where applicable parts/miscellaneous expense codes as listed.
Disclaimer