S-Type (X200) V8-4.2L (2005)
8. CAUTION: Support the driveshaft front and rear sections.
NOTE: Note the position of the driveshaft centre bearing spacers.
Remove the driveshaft.
^
Remove the driveshaft centre bearing spacers.
Installation
1. NOTE: If a new driveshaft is installed, refer to Jaguar Approved Diagnostic System to establish the correct location for the balance nut if
required.
NOTE: Do not fully tighten the driveshaft centre bearing retaining bolts.
Tighten the driveshaft centre bearing retaining bolts.
^
Install the driveshaft centre bearing spacers.