Vanden Plas (X308) V8-4.0L (AJ27) (2000)
/v8-4.0l_(aj27)/Page-1164049.png)
22. Lower and withdraw jack from crossbeam.
23. Release engine from support tool.
Slacken hook adjustment nuts until weight of engine is released.
Remove hooks from engine front lifting eyes.
Remove special tool 303-021 from fender channel.
24. Install crossbeam to engine Hydramount securing bolts.
Install bolt securing Hydramount to crossmember and tighten to 22 - 28 Nm.
Repeat procedure to install crossmember opposite side securing bolt.
25. Position and connect harness to steering transducer.
RHD vehicles. Position steering harness behind return pipe.
Connect harness to transducer.
