Vanden Plas (X308) V8-4.0L (AJ27) (2000)
/v8-4.0l_(aj27)/Page-1164050.png)
26. Install power steering pipes on pinion housing.
Remove blanks and install new O-ring seals in pipe connectors.
Apply power steering fluid to O-ring seals.
Remove blanking plugs from pinion housing ports.
Position pipes on pinion ports and seat O-rings.
27. Secure pipes to pinion housing.
Ensure pipes and retaining plate are correctly seated.
Install bolt and tighten to 9 - 12 Nm.
