Vanden Plas (X308) V8-4.0L (AJ27) (2000)
/v8-4.0l_(aj27)/Page-1168001.png)
Rear Cross-Member: Procedures
Removal CAUTION: Replacement of nuts and bolts: Various thread-locking devices are used on nuts and bolts throughout the vehicle. These
devices restrict the number of times a nut or bolt can be used.
1. Raise vehicle on a four-post lift.
2. Remove subframe to differential-casing rear bracket bolts.
3. Where fitted, remove bolts securing fuel vapor pipe to subframe.