Vanden Plas (X308) V8-4.0L (AJ27) (2000)
Fit suspension subframe mounting-brackets.
Position bracket to subframe.
Install but do not tighten bush center bolt.
Install but do not tighten bolts securing bracket to body.
Following same procedure, install mounting bracket on opposite side.
12. Tighten mounting bracket to body bolts to 80 - 100 Nm.
Following same procedure, tighten mounting bracket bolts on opposite side.
13. Tighten mounting bracket bush center bolt to 80 - 100 Nm.
Following same procedure, tighten mounting bracket bush center bolt on opposite side.
14. Lower and remove jack.
15. Lower four-post lift.