Vanden Plas (X308) V8-4.0L (AJ27) (2000)
35. Connect wheel speed sensor harness.
1. Connect wheel speed sensor harness to sensor.
2. Using new tiestraps secure wheel speed sensor harness to upper wishbone.
-
Repeat procedure to connect opposite side wheel speed sensor.
36. Install brake calipers.
1. Install caliper on carrier.
2. Install guide pins and tighten to 25-30 Nm.
3. Install guide pin dust caps.
4. Install caliper spring clip.
-
Repeat procedure to install opposite side front brake caliper.
37. Install both front road springs.
38. Using screws or new scrivets, secure undertray to front bumper cover.
39. Using a new tiestrap, secure undertray to crossbeam front brace.
40. Using new scrivets, secure undertray to each wheelarch liner.