Vanden Plas (X308) V8-4.0L (AJ27) (2000)
41. Install generator cooling duct deflector.
-
Position deflector over rear vertical duct.
-
Slide deflector forward to engage center tang over undertray.
-
Install bolt and tighten to 17-23 Nm.
42. Install both front road wheels.
43. Raise vehicle, remove stands and lower vehicle.
44. Ensuring graduation mark remains aligned, finally tighten wishbone rear eccentric bolt to 113-153 Nm.
45. Ensuring graduation mark remains aligned, finally tighten wishbone front eccentric bolt to 113-153 Nm.
46. Install air intake tube/meter/cleaner cover assembly.
47. Install both engine covers (normally aspirated vehicles only).
-
Position covers over engine.
-
Install securing pegs.
48. Fill power steering system.