Vanden Plas (X308) V8-4.0L (AJ27) (2000)
5. Remove and discard bushes from retaining panel.
Installation
1. Fit and fully seat new bushes in retaining panel.
2. Fit and fully seat SPORT mode and cruise control ON/OFF switches in retaining panel.
3. Position retaining panel for access and connect SPORT mode and cruise control ON/OFF switch multiplugs.
4. Fully seat retaining panel and fit and tighten securing nuts and screws.
5. Fit 'J' gate surround finisher.
Floor Console Stowage Compartment
Floor Console Stowage Compartment (76.25.16)
Removal
1. Open console glove box lid.
2. Slacken and remove the glove box lid stay securing screw and remove lid stay.
3. Slacken and remove glove box latch securing screws and remove latch assembly.
4. Slacken and remove glovebox liner rear securing screws.
5. Remove glovebox liner from vehicle.
Installation