Vanden Plas (X308) V8-4.0L (AJ27) (2000)
Passenger Assist Handle: Service and Repair
Passenger Assist Handle (76.58.30)
Removal
1. Using a piece of wood or similarly soft material, press inner end of each screw cover to release outer clip.
2. Remove screw covers, slacken and remove securing screws and remove grab handle from cantrail.
Installation
1. Position grab handle and coat hanger hook at cantrail
2. Ensuring that cantrail trim pads are correctly aligned, fit and tighten the grab handle securing screws.
3. Slide each screw cover inner end foremost, onto end of grab handle and press outer end to engage clip.