Vanden Plas (X308) V8-4.0L (AJ27) (2000)
Rear Shelf: Service and Repair
Parcel Shelf
Parcel Shelf (76.67.06)
Removal
1. Open both rear doors.
2. Remove rear seat cushion.
3. Remove rear seat squab.
4. Remove and discard the two fir tree fasteners securing front of tray to parcel shelf.
5. Remove parcel tray.
-
Slightly raise front of shelf trim and lift rear fold clear of body flange.
-
Exercising care to avoid damaging sun blind (if fitted) and rear quarter trims, or dislodging high level stop lamp, slide trim from shelf, twist
slightly and remove from vehicle via rear doors.
Installation
1. Exercising care to avoid damaging sun blind (if fitted) and rear quarter trims, or dislodging high level stop lamp, slide trim onto shelf, engaging
rear fold on body flange.
2. Secure front of trim to shelf using two new fir tree fasteners.
3. Fit rear seat squab.
4. Fit rear seat cushion.