Vanden Plas (X308) V8-4.0L (AJ27) (2000)
8. Release seat harness main multiplug (white) from retaining bracket.
9. Remove clips securing harness to seat sliders.
10. Remove and discard forward tilt potentiometer retaining clip and withdraw potentiometer from drive shaft.
11. Slacken and remove LH seat slider securing bolts and remove seatbelt anchor mounting bracket.
12. Slacken and remove RH seat slider securing bolts and remove seatbelt buckle mounting bracket.
13. Disconnect seat cushion forward tilt motor drive cable.