Vanden Plas (X308) V8-4.0L (AJ27) (2000)
/v8-4.0l_(aj27)/Page-283005.png)
5. Tighten the securing screws to 9 - 11 Nm.
Tighten in the sequence indicated.
Screws annotated in a square have studs to install other components onto, and must be installed in the positions shown.
6. Reposition the clips which secure the engine harness to the cam cover.
7. Install the on-plug ignition coils and the coil cover.
8. Install the right hand engine cover.
9. Install the intake tube / air flow meter / air cleaner cover assembly.
Install a new rubber seal, air intake tube to throttle body.
Install the intake tube / air flow meter / air cleaner cover assembly.
