Vanden Plas (X308) V8-4.0L (AJ27) (2000)
/v8-4.0l_(aj27)/Page-284003.png)
Remove the seal for the VVT solenoid.
10. Clean all relevant parts and mating faces.
Installation
1. Install new seals to the cam cover.
Install the new outer seal.
Install the two new spark plug aperture seals.
Install the seal to the VVT solenoid apertrure.
2. Install the securing screws to the cam covers.
Install a new sealing ring to each screw assembly.
Install the screws to the cam covers. Each screw is retained by the cam cover gasket.
Refer to the tightening sequence diagram for details of where to install the studs.
