Vanden Plas (X308) V8-4.0L (AJ27) (2000)
/v8-4.0l_(aj27)/Page-336010.png)
14. Connect the intake tube to the throttle body.
Connect the intake tube to the throttle body.
Install the two bolts which secure the intake tube to the throttle body.
15. Reconnect the air flow meter multi-plug.
16. Install the engine covers.
17. Install the crankshaft damper.
18. Install the idler pulley, to the Front Accessory Drive.
19. Install the belt tensioner assembly, to the Front Accessory Drive.
20. Install the pulley to the water pump.
Install the pulley to the water pump.
Install the pulley securing screws.
Tighten as far as possible; then to the correct torque after the belt has been installed.
